ProConcrete

Parametric Cell [Technology Preview]

Parametric cells can be created with MS solids with Rebar and saved in cell library. This cell library can be attached to any other dgn and parametric cell can be placed. After placing, cell can be dropped and further operations can be performed like rebar modification, Bar marking, Drawing generation, IFC export, etc.

Match & Extend Tool for 3D Rebar [Technology Preview]

The Match and Extend tool automates the Single Rebar Distribution placement. The tool is used for placing additional rebars like corner rebar, wall , slab , dowels etc.

Fudge Rebar [Technology Preview]

Fudge rebar tool offers the facility to offset the overlapped 2D rebar by required distance in 2D drawing.

Adding Polycut

Now, polycuts can be added in Single Rebar Distribution and Irregular dispatch reinforcement.

Item Types

Item Types properties can be seen in tool tip. By customizing INI file, ItemType propertis can be displayed now in Element tooltip. In below image, item property i.e., User mark for rebar element is displaying in tooltip.

Free Leg Dimensions

Added support for showing rebar Free Leg Dimensions in brackets in Bar Bending Schedule.

Bar Spacing and Bar Zone in ARMA Export

Bar Spacing and Bar Zone is now exported to ARMA. In Arma Export tool, two new Remarks tabs are added using which one can customize their ARMA export.

Remark1 - Can publish ARMA with any Item Type property ${ItemTypeName.ItemtypePropertyName}.
Remark2 - In Remark2, one can write the preset how they want to get their ARMA export. E.g if one wants to have spacing, then can be written as - $d@$ns

Single Tie

Ability to add single tie to the concrete column.

Note: The end value must be less than the spacing to get the Single tie.

Improved AutoLabel Feature

2D Bar, Bar Label and Bar delimiter symbology and display options now can be copied from specified Autolabel.dgnlib to output.dgn file.
Main bar, Long bar, Bar range, Bar label and Level attributes are supported as part of this feature.